Open Access
Issue
ND 2007
2007
Article Number 218
Number of page(s) 4
Section Benchmarking for fission applications
DOI https://doi.org/10.1051/ndata:07172
Published online 17 June 2008
International Conference on Nuclear Data for Science and Technology 2007
DOI: 10.1051/ndata:07172

Validation of important fission product evaluations through CERES integral benchmarks

C.J. Dean, P.J. Smith and R.J. Perry

Serco Assurance, Winfrith Technology Centre, Dorchester DT2 8DH, UK

christopher.dean@sercoassurance.com

Published online: 21 May 2008

Abstract
Optimization of energy resources suggests increased fuel residence in reactor cores and hence improved fission product evaluations are required. For thermal reactors the fission product cross sections in the JEF2.2 and JEFF3.1 libraries plus new evaluations from WPEC23 are assessed through modelling the CERES experiment in the DIMPLE reactor. The analysis uses the lattice code WIMS10. Cross sections for 12 nuclides are assessed. The thermal cross section and low energy resonance data for 147,152m and 155Gd are accurate to within 4%. Similar data for 109Ag, 143Nd and 149Sm are within 8% while 95Mo, 99Tc, 103Rh, 133Cs and 145Nd are within three benchmark standard deviations at ~12%. The use of the 172 XMAS group scheme is adequate for all nuclides considered except 153Eu.



© CEA 2008

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.