Open Access
| Issue |
ND 2007
2007
|
|
|---|---|---|
| Article Number | 107 | |
| Number of page(s) | 2 | |
| Section | Facilities and experimental techniques | |
| DOI | https://doi.org/10.1051/ndata:07756 | |
| Published online | 17 June 2008 | |
International Conference on Nuclear Data for Science and Technology 2007
DOI: 10.1051/ndata:07756
1 Gaerttner Laboratory, Rensselaer Polytechnic Institute, Troy, NY 12180, USA
2 Lockheed Martin Corporation, Schenectady, NY 12301-1072, USA
danony@rpi.edu
Published online: 21 May 2008
© CEA 2008
DOI: 10.1051/ndata:07756
High-accuracy filtered neutron beam and high-energy transmission measurements at the Gaerttner Laboratory
Y. Danon1, R.C. Block1, M. Rapp1, F. Saglime1, D.P. Barry2, N.J. Drindak2, J. Hoole2 and G. Leinweber21 Gaerttner Laboratory, Rensselaer Polytechnic Institute, Troy, NY 12180, USA
2 Lockheed Martin Corporation, Schenectady, NY 12301-1072, USA
danony@rpi.edu
Published online: 21 May 2008
Abstract
Recently a method for high accuracy total cross section measurement in the energy range of 24 keV to 940 keV using an iron filtered beam was developed at RPI. Measurements the total cross section of carbon and beryllium are discussed. A new neutron detection system was developed at RPI and the first measurement with this system is reported here.
© CEA 2008